Gallery – ADCUTECH

Gallery

adcutechltd

#precisionengineering 🙈

#precisionengineering 🙈

When it comes to Culture; Does your company Walk t

When it comes to Culture; Does your company Walk the Talk?

They say that ‘teamwork makes the dream work’, but if that team aren’t all pulling in the same direction, if they have different beliefs and ideas, if they all have a different understanding of the goals and ambitions of the company then it may just be ‘hard work’.

We maintain that our team is one of the keys to our success and we strongly believe in mutual respect and cooperation to achieve the best possible outcomes for our business, customers, and staff.
Over the last few months, our team have been working on our company values. Sharing ideas, beliefs, and opinions of what we each feel are important factors in our work and everyday lives. Ideals that we should strive to achieve and in some cases traits that could be brought to the surface for the benefit of all.

Earlier this year, we spent the day at Wrag Barn Golf Club and with the help of a consultant from Growth Unlimited, brainstormed ideas about what makes a great team. Of course, we had some fun and competition on the way with a nearest the bull golf game, which was very apt considering our venue.

From carrying out this simple task, with one main objective, we were able to review the outcome of our first attempt, discuss potential next steps, and work out possible improvements in our approach to enable us to obtain success.

This exercise set the groundwork for the rest of our day with focus on key words that were important to each of us.

Out of this day and further discussion back at the factory, our work manifested into 5 Values with an understanding of how we reflect & achieve these Values in everything we do.

Our work doesn’t end there. It’s not just about discussing, agreeing, and displaying our Values, we now have to live them. Stand by what they mean, reflect the good traits in all we do, and continually improve our approach to ensure we achieve all we set out to.

The individual. The team. The common ground. The enthusiasm. Our Values are our daily guidelines and apply to all we do and everyone we communicate, collaborate, and do business with.

#team #work #culture #growth #business #help #respect #success #teamwork

Great opportunity to join the ADCUTECH Ltd team. W

Great opportunity to join the ADCUTECH Ltd team. We are looking for a motivated & accomplished CNC Milling Engineer, ideally with G&M code programming experience to join us.

If you have the skills, if you are passionate about working in a hi-tech engineering environment & want to work for a company that invests in both people & technology, contact us today to discuss our vacancy.

For full details or to apply follow the link below or give us a call 📞 01793 765405

https://lnkd.in/eUtkqeua

Great opportunity to join the ADCUTECH Ltd team. W

Great opportunity to join the ADCUTECH Ltd team. We are looking for a motivated & accomplished CNC Milling Engineer, ideally with G&M code programming experience to join us.

If you have the skills, if you are passionate about working in a hi-tech engineering environment & want to work for a company that invests in both people & technology, contact us today to discuss our vacancy.

For full details or to apply follow the Indeed link below.
https://lnkd.in/eUtkqeua

Happy Easter. Our team are looking forward to some

Happy Easter. Our team are looking forward to some well deserved R&R this weekend. Have a great one! 👍🏻#eastereggs #teamwork #precisionengineering

Wishing all our customers & suppliers a very Happy

Wishing all our customers & suppliers a very Happy Christmas and a prosperous 2023

We are looking for a skilled CNC milling engineer

We are looking for a skilled CNC milling engineer to join our team. If you’re interested check out our Ad on Indeed or call us a call. Link in bio

#engineer #cncprogramming #team

We are looking for someone to join our team. If y

We are looking for someone to join our team. If you are interested to find out more follow the link in our bio.

Busy day today at Adcutech. It’s all change wit

Busy day today at Adcutech. It’s all change with old Haas being replaced with Brother R650X. Smooth installation thanks to our team and the team at @whitehousemachinetool

#cncmilling #brotherR650X

RIP Your Majesty

RIP Your Majesty

Hope you all have a nice Easter break #engineeri

Hope you all have a nice Easter break

#engineering #R&R

Employee Spotlight – Stuart Ball This month St

Employee Spotlight – Stuart Ball

This month Stuart is celebrating his 1-year anniversary at Adcutech. Stuart applied for a CNC Milling Operator vacancy with Adcutech with no hands-on engineering manufacturing knowledge. He’s previous experience, although in a factory environment, was assembly & cleanroom production. However, at his interview Stuarts enthusiasm & ethics led us to believe that he would be a good fit for our team with the commitment & capability to develop with Adcutech.
A year later & we were proved right. Stuart has settled in very well with the Adcutech team. He is fully committed, enthusiastic, reliable & he has brought a wealth of continuous improvement knowledge with him. He has progressed well & is a very important member of our manufacturing team. We will be supporting Stuart with his development to help him reach his full potential.

Here’s what Stuart has to say about working with Adcutech.
I have felt welcomed from the minute I walked in the door. Adcutech is the best team of people I have ever worked with, always happy to help and share their knowledge.

What interests you about engineering?
Every day is a learning day. It’s amazing to see a block of metal turn into ‘crazy’ shapes.

What specifically have you learnt so far?
I have learnt how to read technical drawings & to never take your eye off the ball (excuse the pun!), anything can go wrong at any time if you are not diligent and in control of the process.

Anything you have been surprised by?
I was shocked to open the tooling drawer to see so many types of cutting tools. I have never heard of things like dovetail or corner rounding cutters.

How does Adcutech differ from where you have worked before?
Adcutech must be the most open company I have ever worked for. They take you under their wing but at the same time are open to new ideas and suggestions, they want you to succeed.

#teamwork #engineeringbasics #cncmachining #precisionengineering #training

Today it’s #timetotalk day. We all stopped work

Today it’s #timetotalk day.
We all stopped work to share coffee & doughnuts supplies by @lbcoffeeuk and took time out to chat. #rethinkmentalhealth

#mindcharity

Today is #timetotalk Are you taking time out of yo

Today is #timetotalk Are you taking time out of your day to talk. Do it now, mental health cannot be taken for granted 😄

Have a happy & health break.

Have a happy & health break.

#remembranceday #lestweforget🌹

#remembranceday #lestweforget🌹

10 Essential tools when starting out as a CNC Mach

10 Essential tools when starting out as a CNC Machinist

Every CNC machining engineer knows that you need the right tools to do a good job. Having a good range of tools makes your life so much easier, and you more efficient.
It’s best to start out with a small collection that grows as you become more experienced. As you learn from the skilled colleagues around you, they might even let you borrow some of their tools, as long as you look after them.
If you were advising a young machinist who is just starting out, which tools would you recommend they buy?
We have put together a list of the 10 basic tools we think every young machinist should have.

If you have any recommendations let us know!

As part of our ongoing strategy, we have been look

As part of our ongoing strategy, we have been looking at the key characteristics of a perfect
customer for Adcutech.
This is an important exercise as it enables us to review our processes and adopt strategies to
ensure we support our valued customers in the right way.
Establishing long term partnerships with our customers, rather than an arm’s length
approach, allows both parties to develop, innovate and optimise the manufacturing process.
We want to be involved at the design stage so we can discuss manufacturability and cost
effectiveness of the component.
Working together on supply strategies helps manage inventory and cost for both parties.
Whether the solution is weekly call offs based on a Kanban system or annual quantity orders
with scheduled drops, regular communication, and collaboration with the right level of
openness, can enhance the supply chain process and eliminate potential pitfalls.
What are the key characteristics you look for in a Supplier?

We could be your perfect match!
#price #quality #collaboration #reliability #partnership #precisionengineers #strategy #supplychain

We are looking forward to welcoming our new appren

We are looking forward to welcoming our new apprentice to the @adcutechltd team. An enthusiastic and engaging young woman, with a love of engineering and the drive to succeed. Always nice to encourage young people into engineering.
#womaninengineering #ukengineering #apprenticeships #team

As an employer we need to consider how the Governm

As an employer we need to consider how the Government relaxations will alter our work procedures within the business and also in what way they affect how we interact with visitors.

Not all employees of the firm are fully vaccinated and this is a factor in how we continue to operate. Therefore our covid procedures remain in place.

Since the first lockdown most communications have been by email and or telephone, and this should continue.

All visitors to site will still be restricted. Face to face meetings may be held but by prior appointment only.

Visitors will be required to wear a mask whilst in the building and social distancing should continue within all areas.

Thank you for helping us keep our staff & families safe.

Load More Follow on Instagram

© ADCUTECH 2024. Proudly Powered by WordPress